I have a Eiki LC-300 video projector in which the lamp has went out, I
have ordered and received the new lamp, the projector manual does not
say how to install this lamp, If anyone has installed a lamp in one of
these machines, would you please tell me on how this is done.

Thanks

Ben

There Is an access cover on the back of the unit held by two screws.
Remove the cover
than remove the screws holding in the lamp cage. Pull the cage out and
slide he new cage in. Replace all screws and cover, than power on. You
will need to reset the lamp timer after replacing the lamp. There is a
reset button on the back you access thur a hole by the video
connectors. With a small screw driver, push and hold til the words
RESET show on the screen.
wrote:
I have a Eiki LC-300 video projector in which the lamp has went out, I
have ordered and received the new lamp, the projector manual does not
say how to install this lamp, If anyone has installed a lamp in one of
these machines, would you please tell me on how this is done.

Thanks

Ben

Thanks for information

wrote:
There Is an access cover on the back of the unit held by two screws.
Remove the cover
than remove the screws holding in the lamp cage. Pull the cage out and
slide he new cage in. Replace all screws and cover, than power on. You
will need to reset the lamp timer after replacing the lamp. There is a
reset button on the back you access thur a hole by the video
connectors. With a small screw driver, push and hold til the words
RESET show on the screen.
wrote:
I have a Eiki LC-300 video projector in which the lamp has went out, I
have ordered and received the new lamp, the projector manual does not
say how to install this lamp, If anyone has installed a lamp in one of
these machines, would you please tell me on how this is done.

Thanks

Ben