Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
TEAC Z-7000 master cassette deck display problem
Hi,
My TEAC Z-7000 master cassette deck left channel level meter suddenly no working. When cassette tape is playing, only right channel signal level shows up on the display. Both channels sound appears normally on amplifier without degradation. When the deck places in recording mode, the left channel level does not display on either source and monitor mode, the recording function work normally as it does. A shielded left and right signals wire output from the playback amplifier board to the display board which shows signal on an oscilloscope. From these reasons, I am suspecting this problem causes by the display board itself. The schematic diagram shows left and right channels signal go through a NJM4558 dual op-amp first, and connected to NEC upc629c. After upc629C, few digital ICs 4052 (1pc), 4081 (2pcs) and one LSI connected to the display. I am thinking the LSI is the display driver and will not cause this problem since the right channel signal can display normally. The problem may cause by the op-amp or upc629c or digital ICs. I am wondering if anyone has work on this cassette deck and has a similar problem which can share the ideas to me. Also, if anyone has upc629C data sheet which can e-mail to me for troubleshooting. Thanks for the information and I am very appreciate. My e-mail address: Thanks Eric |
#2
Posted to sci.electronics.repair
|
|||
|
|||
TEAC Z-7000 master cassette deck display problem
On Mon, 12 Jun 2006 12:48:30 -0500, "Eric" put
finger to keyboard and composed: My TEAC Z-7000 master cassette deck left channel level meter suddenly no working. When cassette tape is playing, only right channel signal level shows up on the display. Both channels sound appears normally on amplifier without degradation. When the deck places in recording mode, the left channel level does not display on either source and monitor mode, the recording function work normally as it does. A shielded left and right signals wire output from the playback amplifier board to the display board which shows signal on an oscilloscope. From these reasons, I am suspecting this problem causes by the display board itself. The schematic diagram shows left and right channels signal go through a NJM4558 dual op-amp first, and connected to NEC upc629c. After upc629C, few digital ICs 4052 (1pc), 4081 (2pcs) and one LSI connected to the display. I am thinking the LSI is the display driver and will not cause this problem since the right channel signal can display normally. The problem may cause by the op-amp or upc629c or digital ICs. I am wondering if anyone has work on this cassette deck and has a similar problem which can share the ideas to me. Also, if anyone has upc629C data sheet which can e-mail to me for troubleshooting. Thanks for the information and I am very appreciate. Interchange the L and R signals at various stages along the path until you find the point at which the problem moves to the other channel. - Franc Zabkar -- Please remove one 'i' from my address when replying by email. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Deck Damage Emergency | Home Repair | |||
Siemens Gigaset 2420 Display problem | Electronics Repair | |||
Problem with the LCD front panel display on an NEC vcr | Electronics Repair | |||
CD Player Display and Button Problem | Electronics Repair | |||
Fisher cassette heads | Electronics Repair |