Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
machinesmith
 
Posts: n/a
Default help identifying a LCD Module

Hi people,
Thanks for taking the time to look at my problem, and maybe you might know
how to solve it
The LCD module is the same one used in the VDO ms4100 navigation computer.
The markings on it a

LPI7436-2 Q0372214 (0 or O)

Its about 2.5 inches length and 1.5 inches height. Its part of a detachable
display on the face.

A picture of the screen is available here
http://194.74.172.218/ProdImg/prod479.jpg

Thank you for any help!


  #2   Report Post  
Posted to sci.electronics.repair
DaveM
 
Posts: n/a
Default help identifying a LCD Module

"machinesmith" wrote in message
...
Hi people,
Thanks for taking the time to look at my problem, and maybe you might know how
to solve it
The LCD module is the same one used in the VDO ms4100 navigation computer. The
markings on it a

LPI7436-2 Q0372214 (0 or O)

Its about 2.5 inches length and 1.5 inches height. Its part of a detachable
display on the face.

A picture of the screen is available here
http://194.74.172.218/ProdImg/prod479.jpg

Thank you for any help!



These displays are almost always custom made for the application. If you need a
replacement, your best bet is to contact the parts dept. of the manufacturer.


--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

Some days you're the dog, some days the hydrant.


  #3   Report Post  
Posted to sci.electronics.repair
machinesmith
 
Posts: n/a
Default help identifying a LCD Module

These displays are almost always custom made for the application. If you
need a replacement, your best bet is to contact the parts dept. of the
manufacturer.


--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters
in the address)



Thanks for your response Dave, though thats obviously the first thing I
tried...
VDO never actually sold the face as a spare part and they don't sell any of
the components, so you can't get them. Ive contacted the VDO departments
here and in Germany (where they are made) and nobody is able to help me or
tell me what the actual LCD module is
You can't even get any schematics from VDO, as far as they are concerned the
faulty LCD display on this particular unit is UNREPAIRABLE because they
don't have the parts and they consider it to be a throw away item.

Makes me laugh when I read VDO's advertisements that say Future Proof.

Thanks anyway man


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
EEPROM swap in convergence module box (Hitachi 55FX20B) Jason D. Electronics Repair 1 May 13th 06 12:48 PM
Small Engine Ignition Module [email protected] Home Repair 13 November 5th 05 04:05 PM
LeCroy Oscilloscope/ VME/ CAMAC/ NIM/ FASTBUS repair fernando1222 Electronics Repair 0 June 7th 05 09:18 PM
PLEASE HELP !! Toshiba 32ZD08B Stuck in Standby + Green Screen (help locating the Teletext module) Scott Electronics Repair 3 November 20th 04 01:57 PM
DVI module in JVC projector (DxxWPxx) series has light sensor! Jason D. Electronics Repair 0 June 26th 04 05:42 AM


All times are GMT +1. The time now is 06:42 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"