 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Separating Composite video signal???
I have a small monitor that has separate video signals, video, horz/vert
sync signals. I am looking to interface a composite video camera to this monitors input. I have read about a IC chip that will separate the sync signals, the LM1881. How would I get the video portion separated from the composite signal to feed it the video input circuitry of the monitor? Thanks. -- A7N8X-Deluxe, AMD XP2500+ (Un-locked) 2x256mb Crucial PC3200 DDR ram Palit-Daytona Ti4200/64M AGP |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| syncronizing 3 diferent video signal | Electronics Repair | |||
| Printing / Capturing Composite (ntsc) Video Snapshots Without a PC | Electronics Repair | |||
| Video signal from CCTV cameras?? | UK diy | |||
| NTSC-compatible video signal circuit - ntsc.pdf (0/1) | Electronics | |||
| Composite video output to "AV in" input? | Electronics Repair | |||
Threaded Mode
