I have a Blaupunkt Honolulu CD player whose LED screen suddenly went very
dim a while back. I removed the front panel, cleaned the contacts
(alcohol, compressed air), even took the panel apart and cleaned up
whatever I could -- all to no avail. Any tips on what else can be done?

TIA

"Bob" wrote in message ...
I have a Blaupunkt Honolulu CD player whose LED screen suddenly went very
dim a while back. I removed the front panel, cleaned the contacts
(alcohol, compressed air), even took the panel apart and cleaned up
whatever I could -- all to no avail. Any tips on what else can be done?

TIA

We need to establish first, what sort of display it is, as dimness will have
different reasons. It is unlikely to be a LED display, but if it is, it will
be a drive problem. If it is an LCD panel, then the backlighting will
probably have failed. If it is a VFD, the problem will be that the inverter
that generates the negative 30v supply for the panel, and the filament
supply, will be producing low output, probably due to a bad cap.

Arfa

"Bob" wrote in message ...
I have a Blaupunkt Honolulu CD player whose LED screen suddenly went very
dim a while back. I removed the front panel, cleaned the contacts
(alcohol, compressed air), even took the panel apart and cleaned up
whatever I could -- all to no avail. Any tips on what else can be done?

TIA

Isn't that a 2001 model unit? This unit should have an LCD display.
Underneath the display there should be 2 6.3v microlamps wired in series, as
this unit was actually manufactured by Sony for Blaupunkt. You have to
remove the LCD to replace the lamps. East Coast Transistor has the lamps, I
can't remember if their catalog number is ML14 or ML15, one of them is 6.3,
the other is 12v. Their website is: http://www.kenwoodparts.com
but you'll have to call to order the generic items, they only have the
Kenwood catalog online.

Jammy