Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
UK part question
HI I am after a 20k pot similar to this one from farnell
http://uk.farnell.com/jsp/endecaSear...&Ntk=gensearch but I am after one with a splined shaft so it matches the original so I can reuse the knob,its from a gain control on an guitar amp -- Reply Address does work ?? |
#2
Posted to sci.electronics.repair
|
|||
|
|||
UK part question
Mr Fixit wrote:
HI I am after a 20k pot similar to this one from farnell http://uk.farnell.com/jsp/endecaSear...&Ntk=gensearch but I am after one with a splined shaft so it matches the original so I can reuse the knob,its from a gain control on an guitar amp Try Watford Valves www.watfordvalves.com I think Ron(UK) -- Lune Valley Audio Public address system Hire, Sales, Repairs www.lunevalleyaudio.com |
#3
Posted to sci.electronics.repair
|
|||
|
|||
UK part question
Mr Fixit wrote:
|| HI I am after a 20k pot similar to this one from farnell || || http://uk.farnell.com/jsp/endecaSear...&Ntk=gensearch || || but I am after one with a splined shaft so it matches the original || so I can reuse the knob,its from a gain control on an guitar amp || -- In the past I've found it to be a relatively straightforward matter to reduce the size of the 'plastic spindled' variety of pot so that the knob is a nice tight push-on fit. || Reply Address does work ?? |
#4
Posted to sci.electronics.repair
|
|||
|
|||
UK part question
"Ivan" wrote in message ... Mr Fixit wrote: || HI I am after a 20k pot similar to this one from farnell || || http://uk.farnell.com/jsp/endecaSear...&Ntk=gensearch || || but I am after one with a splined shaft so it matches the original || so I can reuse the knob,its from a gain control on an guitar amp || -- In the past I've found it to be a relatively straightforward matter to reduce the size of the 'plastic spindled' variety of pot so that the knob is a nice tight push-on fit. || Reply Address does work ?? I just emailed the maker (why I never did before is beyond me) and they are sending one free of charge so that's hopefully a result |
#5
Posted to sci.electronics.repair
|
|||
|
|||
UK part question
On Tue, 18 Apr 2006 13:48:51 GMT, "Mr Fixit"
wrote: HI I am after a 20k pot similar to this one from farnell http://uk.farnell.com/jsp/endecaSear...&Ntk=gensearch but I am after one with a splined shaft so it matches the original so I can reuse the knob,its from a gain control on an guitar amp It looks like Rapid Electronics might have what you are looking for http://www.rapidelectronics.co.uk/rk...9587&XPAGENO=1 |
#6
Posted to sci.electronics.repair
|
|||
|
|||
UK part question
"Ross Herbert" wrote in message ... On Tue, 18 Apr 2006 13:48:51 GMT, "Mr Fixit" wrote: HI I am after a 20k pot similar to this one from farnell http://uk.farnell.com/jsp/endecaSear...&Ntk=gensearch but I am after one with a splined shaft so it matches the original so I can reuse the knob,its from a gain control on an guitar amp It looks like Rapid Electronics might have what you are looking for http://www.rapidelectronics.co.uk/rk...9587&XPAGENO=1 thats very similar but no 20k on that site but I have booked marked it |
#7
Posted to sci.electronics.repair
|
|||
|
|||
UK part question
On Thu, 20 Apr 2006 07:37:40 GMT, "Mr Fixit"
wrote: "Ross Herbert" wrote in message .. . On Tue, 18 Apr 2006 13:48:51 GMT, "Mr Fixit" wrote: HI I am after a 20k pot similar to this one from farnell http://uk.farnell.com/jsp/endecaSear...&Ntk=gensearch but I am after one with a splined shaft so it matches the original so I can reuse the knob,its from a gain control on an guitar amp It looks like Rapid Electronics might have what you are looking for http://www.rapidelectronics.co.uk/rk...9587&XPAGENO=1 thats very similar but no 20k on that site but I have booked marked it You could try swapping the original for the 10K or 47K version. For a mere 38p it would be worth trying it out. My guess is you wouldn't notice a whole lot of difference (if at all) over the 20K version. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Expanding Mandrels | Metalworking | |||
Part P question | UK diy | |||
Question about replacing sash cords on old windows - NOT the kind with weights. | Home Repair | |||
Identify Part - Help Needed | Electronics Repair | |||
DVI input specification of Pioneer PDP504PE (The screen part of the Pioneer PDP504HDE) | Electronics Repair |