Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
Sam Goldwasser
 
Posts: n/a
Default Brightness Control of Monitor

Christopher writes:

Hello,

Since the day I received my Gateway Vivitron or CS1572 8 years ago it
has had dim brightness (no detail in dark areas of photos). The normal
controls on the front of the monitor are maxed out.

Today I pulled the monitor cover and found two focus controls on
the left side.

There is a third Pot under the two focus controls that is "glued" into
a fixed position,


It is probably the screen/G2 control and will affect brightness.

However, there may be another master brightness control somewhere, or
it may be a menu item only accessible via special software.

It shouldn't hurt to turn up the screen/G2 pot slightly. That may be all
you need.

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mitsubishi Diamond Plus 220 monitor - insufficient brightness Luke Siemaszko Electronics Repair 2 March 16th 06 08:56 PM
Zeroeth level pc monitor repair N Cook Electronics Repair 2 December 21st 05 08:50 PM
benq monitor gets blurry after being stored for a long time Edison O'billy Electronics Repair 4 June 3rd 04 04:28 AM
OT What is happening to the gun control movement? Gunner Metalworking 21 May 27th 04 02:14 AM
21" Monitor problem: Poor brightness. Dell D1626HT/ Sony GDM-500 chassis Sofie Electronics Repair 2 August 8th 03 04:40 AM


All times are GMT +1. The time now is 03:28 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"