View Single Post
  #1   Report Post  
Posted to sci.electronics.repair
Sam Goldwasser
 
Posts: n/a
Default Brightness Control of Monitor

Christopher writes:

Hello,

Since the day I received my Gateway Vivitron or CS1572 8 years ago it
has had dim brightness (no detail in dark areas of photos). The normal
controls on the front of the monitor are maxed out.

Today I pulled the monitor cover and found two focus controls on
the left side.

There is a third Pot under the two focus controls that is "glued" into
a fixed position,


It is probably the screen/G2 control and will affect brightness.

However, there may be another master brightness control somewhere, or
it may be a menu item only accessible via special software.

It shouldn't hurt to turn up the screen/G2 pot slightly. That may be all
you need.

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.