Did the capacitors replacement in the hyper module got the color back
except I have noise horizontal lines across image on whole screen. It
goes away gradually as TV runs for several minutes after cold start
up.

Seen this before?

Cheers, Wizard

Jason How Many Caps Did You Replace On The Board ?
kip
"Jason D." wrote in message
...
Did the capacitors replacement in the hyper module got the color back
except I have noise horizontal lines across image on whole screen. It
goes away gradually as TV runs for several minutes after cold start
up.

Seen this before?

Cheers, Wizard

On Mon, 13 Mar 2006 19:49:15 -0500, "kip" wrote:

Jason How Many Caps Did You Replace On The Board ?
kip
"Jason D." wrote in message
.. .
Did the capacitors replacement in the hyper module got the color back
except I have noise horizontal lines across image on whole screen. It
goes away gradually as TV runs for several minutes after cold start
up.

Seen this before?

Cheers, Wizard


Kip, all of them, made sure to use computer grade caps. Including 11
10uF 16V caps.

Cheers, Wizard

Ok Jason ...I have done many and now always change all of them.
Check the socket were the Module plugs in resolder both the
socket and plug sections just to be safe.
What I did first was to photograph the Module so ,as when installing them
I didn't put any in backwards and good job I did because one time
I put one in backwards,best double check your work.

kip

"Jason D." wrote in message
...
On Mon, 13 Mar 2006 19:49:15 -0500, "kip" wrote:

Jason How Many Caps Did You Replace On The Board ?
kip
"Jason D." wrote in message
. ..
Did the capacitors replacement in the hyper module got the color back
except I have noise horizontal lines across image on whole screen. It
goes away gradually as TV runs for several minutes after cold start
up.

Seen this before?

Cheers, Wizard


Kip, all of them, made sure to use computer grade caps. Including 11
10uF 16V caps.

Cheers, Wizard