Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
STRS6301A runs hot in a KV27EXR25
I just replaced this chip and did the usual soldering of bad
connections on this 14 year old Sony. Although the set now looks great the regulator IC runs too hot to touch. The set has been operating for a couple of hours now but both the chip as well as the heat sink are too hot it seems. I ESR'd the caps in the power supply and they all look OK. Maybe hot is OK for this circuit but I just thought I'd ask if anyone might have any thoughts on this. Thanks. Lenny Stein, Barlen Electronics. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
10hp RPC runs Airco Mig just hunky dory | Metalworking | |||
AC runs continuously | Home Repair | |||
A/C fan runs, no compressor | Home Repair | |||
CENTRAL HEATING PIPE RUNS | UK diy | |||
Cable runs | UK diy |