Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Sony KV-HZ29M65
I have a Sony KV-HZ29M65 TV, about 1.5 years old.
Recently this TV turned on for a while with sound and no picture at all, and then shutdown and the lamp indicator, blinking 10 times. After some checking, actually accidentally, I can turn the tv on. It is happened when I measure the voltage at pin 2 or 3 or 4 of IC8002 (MCZ3001). It's running normal, can be turn into standby mode and being turned on again. But if I unpluged the tv from the main power, or turn it's main power off, the tv can not be turned on again. It can be turned on again if I unplug its main power, turned it on (it would go to standby mode) and turned it on with remote control (the audio would come up, no picture) and touch the pin 2 or pin 3 or pin 4 with the tip of multitester lead. (The other end of the lead is open.) Thanks, Agusril |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Possible problems with Sony VCR (model slvn750) | Electronics Repair | |||
1991 Sony 8MM Camcorder real wierd problem --need expert help | Electronics Repair | |||
AG 7350 and Sony Editor ? Qustion for Sony god's or Panasonic god's. | Electronics Repair | |||
Sony G500 Monitor Repair | Electronics Repair | |||
Sony G410R Monitor problem (and bad Sony support) | Electronics Repair |