Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
hi i was doing some keyboard repairs at a school today and both my
desolder pumps stopped working - i determined that the cause was not a blockage as usual but that it needed lubrication - i asked the janny for some wd40 but he didnt have any but he suggested washing up liquid - i put some on the piston and its working better than new - is this a bad idea will it eat away the rubber ? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Priming the Water Pump | Home Ownership | |||
Low Water Pressure - pump stops at 20 psi - need advice Please | Home Repair | |||
Heat pump thermostat question | Home Repair | |||
Need advice with rural water well pump design | Home Repair | |||
Swimming Pool Pump | Home Repair |