I am not sure if anyone can help me. But I thought I'd ask before I
buy a new one. I have a pair of Infinity IL 50 home speakers. They
are a tower speaker with a powered sub built into it. When you apply
a signal to these speakers they will kick on by themselves. What my
problem is, my left channel does not power up at all...in other words
it is dead. Let me explain further, cause my situatuion might help me
a get an answer from an electonics guru.

This amp will turn on. When it wants to more or less. This is what
is frustrating about the whole situation. Let say the amp is
working, and all of a sudden the power to the speaker is cut
off...via a poweroutage or unplugging the unit. When power is
reapplied to the amp. It will not power up. But, if the speaker
sits for a week or so and no power is applied to it. When it is
plugged back in the led will show that it is working...and it does!
But, when the power is disrupted it will not turn back on right away.


What would cause this in the power supply. I'm pretty sure that is
where the problem lies. But I don't understand what would cause
this. I was told that a resistor in this amp/power supply is faulty.
It will lose it's value when the power is disrupted and will slowly
get the value back over time. (this is a common problem with this
speaker/amp). I have scoured the net for an answer but nothing is
out there. I don't know if I believe the line about the resistor.
But if anyone has had any experience with this speaker and problem or
just kinda know what you are talking about I would greatly appreciate
your help! Thanks in advance!