Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
HP 201C questions
I have a HP201C oscillator, which mostly works. But, on the one freq range that
I need (x1), the output dies after a short period. This sometimes takes just seconds, sometimes a few minutes. Other freq ranges are OK. A couple of questions: 1. Is there some "all you've gotta do ..." fix for this problem? 2. How do you open the case up? I have a schematic. TIA, George |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FAQ: Answering questions emailed direct to 'editor' | UK diy | |||
PEX Fresh Water system/repipe questions -l ong | Home Repair | |||
More gas questions | Home Repair | |||
Questions about Pest or Termite Control | Home Ownership | |||
Questions about Pest and Termite Control | Home Repair |