Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Cushman CE50 help needed
Hi,
I have a slightly sick Cushman CE50-TG-1 service monitor and was wondering if anyone has taken any voltage readings from a working unit they would be willing to share. I need to check the voltages at test points 3 & 4 on the 29000 board with the frequency set between 9.9999mhz and 100khz. That should give me the normal range for both the A & B VCO's control voltage's. (referenced to chassis ground) Any other voltages would be helpful so I can note them for future reference. Sure would have been nice if Cushman would have provided some basic voltage readings on the schematics. Any help would be appreciated, Thanks, RoD |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Windows replacing: needed scaffolding? | UK diy | |||
Cushman CE50 help needed | Electronics | |||
Contractors needed in New Orleans ! | Home Repair | |||
Part needed: Kenwood Car Radio KDC-MP625 part needed | Electronics Repair |