Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
mc
 
Posts: n/a
Default Help need finding a TL083CN trade or buy

"mc" wrote in message news:...

"Boborann" wrote in message
...
Would anybody happen to have one we can trade for or direct me to where I
can buy one I googled it and can't find any sources
I hate to spend $25 for a part that cost a buck.\


What is the relationship between TL083 and TL081/082/084? The latter
three are common.


I think I found the answer -- TL083 is a TL082 with some additional trimming
adjustments. Sorry, I don't know where to get one.


  #2   Report Post  
Posted to sci.electronics.repair
Sam Goldwasser
 
Posts: n/a
Default Help need finding a TL083CN trade or buy

"mc" writes:

"mc" wrote in message news:...

"Boborann" wrote in message
...
Would anybody happen to have one we can trade for or direct me to where I
can buy one I googled it and can't find any sources
I hate to spend $25 for a part that cost a buck.\


What is the relationship between TL083 and TL081/082/084? The latter
three are common.


I think I found the answer -- TL083 is a TL082 with some additional trimming
adjustments. Sorry, I don't know where to get one.


Maybe:

http://www.halted.com/ccp12423-083--...l083-82443.htm

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
  #3   Report Post  
Posted to sci.electronics.repair
James Sweet
 
Posts: n/a
Default Help need finding a TL083CN trade or buy

mc wrote:
"mc" wrote in message news:...

"Boborann" wrote in message
...

Would anybody happen to have one we can trade for or direct me to where I
can buy one I googled it and can't find any sources
I hate to spend $25 for a part that cost a buck.\


What is the relationship between TL083 and TL081/082/084? The latter
three are common.



I think I found the answer -- TL083 is a TL082 with some additional trimming
adjustments. Sorry, I don't know where to get one.




I'd try a TL082 and see if that works, it may well do the job.
  #4   Report Post  
Posted to sci.electronics.repair
James Sweet
 
Posts: n/a
Default Help need finding a TL083CN trade or buy

Boborann wrote:
Unfortunately The application I have a Wavetek 182 signal generator uses the
offset function in a capacitance multiplier and I want to get this unit
running again
I suppose I could use a pair or TL081 units as a last resort
Bob



There's gotta be something equivilant out there, try the parametric
search on companies like TI and Analog Devices. There's loads of op-amps
out there.
  #5   Report Post  
Posted to sci.electronics.repair
Sam Goldwasser
 
Posts: n/a
Default Help need finding a TL083CN trade or buy

...
"mc" writes:

"mc" wrote in message news:...

"Boborann" wrote in message
...
Would anybody happen to have one we can trade for or direct me to
where I
can buy one I googled it and can't find any sources
I hate to spend $25 for a part that cost a buck.\

What is the relationship between TL083 and TL081/082/084? The latter
three are common.

I think I found the answer -- TL083 is a TL082 with some additional
trimming
adjustments. Sorry, I don't know where to get one.


"Sam Goldwasser" wrote in message


Maybe:

http://www.halted.com/ccp12423-083--...l083-82443.htm


"Boborann" writes:

Unfortunately The application I have a Wavetek 182 signal generator uses the
offset function in a capacitance multiplier and I want to get this unit
running again.


I suppose I could use a pair or TL081 units as a last resort
Bob


So what's wrong with the TL083 in the link above?

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.


  #6   Report Post  
Posted to sci.electronics.repair
Ancient_Hacker
 
Posts: n/a
Default Help need finding a TL083CN trade or buy

There are a lot of new op amps out there that are already very well
trimmed and don't need any external trimming, AND have the same voltage
range and pinouts. Use the parametric search engine at www.ti.com.

  #7   Report Post  
Posted to sci.electronics.repair
Doug
 
Posts: n/a
Default Help need finding a TL083CN trade or buy

http://www.goldmine-elec-products.co...em=1&mite m=1

$10 min order shipping flat $6 thaey have many other surplus items..

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Trade discount at B&Q? Lobster UK diy 19 March 31st 05 07:56 PM
ANCIENT MARINERS: Andean-Mexican seagoing trade Yuri Kuchinsky Metalworking 24 July 11th 04 04:54 AM
WANT TO TRADE - RALEIGH, NC, AREA J T Woodworking 2 February 18th 04 02:21 PM


All times are GMT +1. The time now is 07:39 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"