The set has no vertical. High voltage is OK. I replaced the vertical
IC, but no help. I resoldered the jungle IC and deflection plug also. I
don't have the schematic for this set, but I have checked all
electrolytics in the area only for value. My ESR meter is on loan to a
local shop. Since I am a beginner, and don't have much experience
troubleshooting vertical problems, I was hoping someone has experience
with this particular model and could point me in the next direction.
Thanks as always.

Many SONY schematics are available for free download at this address.
Give it a try. Good luck!

http://schematicsforfree.mattsoft.net/

If you're a beginner, then take it to a shop, perhaps the one that took
your ESR meter. There is enough high voltage in those cocksuckers to
burn your nuts off to the floor.