Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Satellite Finder (KU Band) (Pas7/10)
Hi
I have googled unsucessfully, and was hoping somebody here could help out. I am looking for a schematic for a Satellite Finder for the KU Band (Pas7/10), the one that I have used before plugs between the LNB and Decoder, It derives its power from the feed to the LNB. You connect an earphone to this unit, and when moving the dish, the tone varies, from a high pitch when not aligned correctly, the pitch lowers as you get closer to the center alignment, then the pitch peaks again as you have the dish centered on the signal. I know I can buy these units, but it will be more fun trying to make my own. Please let me know if somebody can point me to schematics. Decoder -------------------- Satellite Finder ------------- LNB | Earphone Thanks Peter |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Toshiba Laptop for Parts | Electronics Repair | |||
I lost my stud finder | Home Repair | |||
Siting a satellite dish using satellite eclipse with the sun | UK diy | |||
Installation of Mulitple Satellite Receiver Lines | Home Repair |