I have one of these to repair!
The symptoms: It turns on and you can see the logo on powerup.
1 to 2 seconds later it turns itself off and then back on again,
adinfinitem!

Any ideas?

regards Andrew

"Andrew Tweddle" wrote in message
...
I have one of these to repair!
The symptoms: It turns on and you can see the logo on powerup.
1 to 2 seconds later it turns itself off and then back on again,
adinfinitem!

Any ideas?

regards Andrew

Could be lots of things, but a mechanical hangup is possible, or there could
be a problem in the power supply. I've seen, for example, a shorted spindle
motor cause damage in the power supply, then none of the motors would work.

Mark Z.

Mark D. Zacharias wrote:

"Andrew Tweddle" wrote in message
...

I have one of these to repair!
The symptoms: It turns on and you can see the logo on powerup.
1 to 2 seconds later it turns itself off and then back on again,
adinfinitem!

Any ideas?

regards Andrew


Could be lots of things, but a mechanical hangup is possible, or there could
be a problem in the power supply. I've seen, for example, a shorted spindle
motor cause damage in the power supply, then none of the motors would work.

Mark Z.


Dead Cap in PS C22 1000uF 16v

Thanks Andrew