References: .net
In-Reply-To: .net
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Message-ID:
Lines: 28
NNTP-Posting-Host: 64.38.163.140
X-Trace: sv3-ryOhvOaUd3MrrT4E/cDnVfOmS/GGrQpmm06aBQg61azJAwm6j7Im/y5xK4/UuvknzcpTWssjVfI3oLz!+SKY8exsdH1UNJaWlrDBEOale9Tx+ GjCd1Rv77INmf68Bh+NokAJJWNidVEFMjUcAfFAM2rIutGI!5p 5Ue+/WR6Ep
X-Complaints-To:
X-DMCA-Complaints-To:
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.32
Xref: number1.nntp.dca.giganews.com alt.autos.gm:143435 rec.autos.tech:461344 sci.electronics.repair:425264

(Sigh....)Nobody gets it. Think outside the box, guys. If the tuner is
not getting any input, it can't lock onto any stations. Check the
antenna and connections.
JR

Rob B wrote:
trying to see if anyone is familiar with this problem ?

the original radio (Delco) is stuck in station scan mode ?

yes, scan is off, there is a little SC in display that goes on and off when
you cycle the scan button but radio still scans

Is there a way to disable the scan feature by modifying the pcb board, a
jumper, patch, etc

any suggestions for radio replacement that kinda blends in (basic black
face, green display)

TIA
robb




--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth