Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Dead CTC169
I have a dead P46730WK (CTC169). R767U on HV Reg was burned. Replaced
resistor and found B+ to be around 165 volts in standby. When set is first plugged in, several clicks can be heard from area of flyback. Replaced the following: C4101 C4102 C4104 C4108 C4145 C4401 C4402 CR4118 CR4401 CR4402 Q4101 Q4401 U4101 This did not correct the problem. B+ is around 175 now, and the set has a constant ticking when plugged in. Removed lead from HV splitter with no luck. I have a replacement HV splitter but I won't replace it with the B+ still high. Any suggestions? Thanks |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Dead Cat Pushsticks no longer the Best Use | Woodworking | |||
OT - Blue & Red | Metalworking | |||
Ever turn a dead leprechaun?!? | Woodturning | |||
Dead Leprechaun Coffins | Woodworking | |||
SmartUPS dead? | Electronics Repair |