Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
took out vcr from tv and it stays on for a few seconds now
I have a Magnavox tv combo and it was stuck in blue screen mode with a
stuck tape. Took the tape out and still blue screen. I have no remote. So I tore out the whole vcr unit and unplugged the connectors. No tv period. So I took some on the vcr units small circuit boards and reattached them and still nothing. Then I took out a mull-ti switch from the vcr ( two round plate for contact) and reattached it. dialing some settings let me have the tv back working very good but only for a few seconds? what needs to be done to fake the tv into thinking that the vcr unit is still there? Or simply get the tv to stay on? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
JVC VCR HR-S7600U Only on for 3 seconds | Electronics Repair | |||
VCR picture clear & then noisy every 5 seconds | Electronics Repair | |||
Furnace Burners go off & Blower Stays On Before Setpoint Reached | Home Repair | |||
Sharp Microwave powers down after 40 seconds, need assistance | Electronics Repair | |||
Baxi bahama switches between HW and CH every few seconds | UK diy |