Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
MDS-501 problem
NOSPAM schreef in bericht . .. It's probably the micro switch not detecting the MiniDisc: http://members.tripod.com/~snnake11/ Jos "Yde" schreef in bericht . .. Hello, I've bought a goodlooking second-hand mds-501. The minidisk has one problem. When starting for the first time the unit won't accept the disc. The disc starts turning but the laserunit does not move. I've to place it vertical on the side of the powerbutton. When he recognices it I can place it horizontal again. After playing or recording the first minidisk the problem seems to be over. I can play or record for hours without a problem but the next day the problem is back. Problems with a switch?? Heath problem. (when the unit is warm after a while it works perfectly ) Any suggestions?? Thanks in advance. Yde Thanks for your reply. But the minidisc is detected. The disc starts spinning but the laser doesn't move a litlle, what he does when succeeding reading the TOC. Only when the machine is cold he refuges to read the disc. Later on it works perfectly. I've treated the switch beside the laserunit with kontaktspray. I've cleaned the laser. But nothing works. The only thing I can think of is that the laser has not got the right temperature at the start. More suggestions? Thanks Yde The Netherlands |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Outside drain problem... Who is responsible? | UK diy | |||
SONY 35" Dual PIP -Video Blackout Problem | Electronics Repair | |||
Paslode IM250A Cordless Finish Nailer, Stripped Treads Problem | Woodworking | |||
Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |