Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Phillips question.
Main board replaced, due to smashed original, now
plug it in, unit comes on, & you have to unplug to turn it off. Works fine, but "F" in top right of screen..."factory" mode. Talked to Tech in Ontario, tried all his suggestions, like holding vol up, channel down...etc, etc...! He's not sure, nor are his co-workers up there. Replace the EEPROM with the one from the damaged original board? Rono. |
#2
|
|||
|
|||
On Sun, 18 Sep 2005 01:30:37 -0230, "Rono" wrote:
Main board replaced, due to smashed original, now plug it in, unit comes on, & you have to unplug to turn it off. Works fine, but "F" in top right of screen..."factory" mode. Talked to Tech in Ontario, tried all his suggestions, like holding vol up, channel down...etc, etc...! He's not sure, nor are his co-workers up there. Replace the EEPROM with the one from the damaged original board? Rono. A model number would help. You probably need to use the factory service remote to exit factory mode. I don't think you can do it with the regular remote and service menu. Swapping the EEPROM from the old board would probably do it and you also won't need to make as many adjustments to the new chassis. Andy Cuffe -- Use this address until 12/31/2005 -- Use this address after 12/31/2005 |
#3
|
|||
|
|||
Thanks andy, I don't have the model, it's at work.
I'll check it Monday, & post it. Rono. Main board replaced, due to smashed original, now plug it in, unit comes on, & you have to unplug to turn it off. Works fine, but "F" in top right of screen..."factory" mode. Talked to Tech in Ontario, tried all his suggestions, like holding vol up, channel down...etc, etc...! He's not sure, nor are his co-workers up there. Replace the EEPROM with the one from the damaged original board? Rono. |
#4
|
|||
|
|||
Replaced EEPROM, works fine. Rono.
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
To anyone sick of alt.hvac | Home Repair | |||
Phillips question! | Electronics Repair | |||
OT Guns more Guns | Metalworking | |||
Plumbing Question | UK diy | |||
Question????? | Woodworking |