Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Sony PFM-510A1WU Plasma Problem
I have a Sony model PFM-510A1WU.
I have a problem with the display, and figure out what to do next. It only has a picture in the left half of the screen Menu will display across the screen, but picture in only left half. I tried resetting the EPROM's, but still the same problem. Any ideas would be greatly appreciated. Thx, |
#2
|
|||
|
|||
If it is more than a loose connection or something you can visually find,
you will not be able to service this yourself. These are serviced with board swapping, and then using the proper factory service set-up systems to properly calibrate the set. There are specialized instruments and tools required to service these plasma sets. Call your local Sony service rep to have the set properly repaired. -- JANA _____ "Buster Lynn" wrote in message ... I have a Sony model PFM-510A1WU. I have a problem with the display, and figure out what to do next. It only has a picture in the left half of the screen Menu will display across the screen, but picture in only left half. I tried resetting the EPROM's, but still the same problem. Any ideas would be greatly appreciated. Thx, |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sony KV-32S42 problem | Electronics Repair | |||
SONY PLASMA PROBLEM | Electronics Repair | |||
Sony TV problem - intermittent blanking | Electronics Repair | |||
I dropped the tv ( Sony circa December 1985) | Electronics Repair | |||
Sony TV vertical interlace problem... | Electronics Repair |