Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Zenith no sound
I have a Zenith model #SJ1325W. Repaired the vertical deflection
problem, but no sound. I traced the audio with a scope from the processor to the audio amp and no audio. I figured bad processor, so replaced it and the audio amp for good measure. Still no audio. Substituted coupling caps also but no luck. The set keeps showing mute OSD when channels are changed. Hit mute on remote, but still no audio. The word mute and the volume bar stay the color red also, not sure if it should go green when not muted. Is something gimped in the set up possibly? If so, would any of you have the access code to fix? I don't know what else could be wrong. Thanks for the replies. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Zenith TV model B25A24Z no sound | Electronics Repair | |||
jvc av 27920 a 67 chassis loss of sound | Electronics Repair | |||
Won't buy another new Zenith | Electronics Repair | |||
Zenith SR3587DT Sound OK, No Picture???? | Electronics Repair | |||
Zenith TV problems | Electronics Repair |