 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
PTK169 dead
Got this set, symptoms: dead, no startup, no power LED, no response from
panel or IR. Removed the HV lead from the splitter, checked the hot, it is good. power supply starts, system will not. There is 137.8VDC standby B+ on the HOT. Any ideas? |
|
#2
|
|||
|
|||
|
What are the rest of the standby voltages?
|
|
#3
|
|||
|
|||
|
There are many things that could cause it! Just "Google"
the model, or chassis #, as dead! Check/replace CR4118! Common, Rono. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| OT - Blue & Red | Metalworking | |||
| 1 3/8" thick door with dead bolt? | Home Repair | |||
| Ever turn a dead leprechaun?!? | Woodturning | |||
| Dead Leprechaun Coffins | Woodworking | |||
| SmartUPS dead? | Electronics Repair | |||
Linear Mode
