 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
CET Technology DC/DC converter for VF-Display
I am repairing Thermo Orion 525A pH-meter with a VF-Display.
It looks like there is a short in the DC-DC converter module. The module is made by CET Technologies, model CT-1058. I am unable to find info about it on their website and they do not reply to my e-mails asking for help... It has 7 pins, two for +5V/GND input, two for the 45V output and three strange pins in the middle showing about 6V on a working unit but when measured with ohm-meter they show short (transformer taps?). I am looking for ideas of buying a replacement DC/DC module or to make something from scratch which will work similar. Please advise. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Flakey LCD display on PowerBook | Electronics Repair | |||
| Display has no hard wire connections. | Electronics Repair | |||
| Siemens Gigaset 2420 Display problem | Electronics Repair | |||
| FA: Sharp 320 x 240 backlight monochrome touch screen LCD display LM32015T | Electronics Repair | |||
| Phase converter balancing | Metalworking | |||
Threaded Mode
