I have a Toshiba cinema series hd ready set that will not cut on. If you try
to cut it on, all you get is the red power light starts flashing. If you
reboot the power the set comes on with no problem. The picture and sound are
great, but the tv has to be rebooted to start it. The problem was random at
first but now it's everyday.

Jim

There is a problem that one of the many protect circuits are detecting
on power on. Get it fixed now before you have more parts fail and will
cost more to repair. There are too many different protect circuits and
circuits being monitored to know the cause of the failure without some
serious troubleshooting time in the set when it is acting up.

Or at least a model and chassis number, too many Toshiba Cinema models to
even hazard a viable guess.
wrote in message
oups.com...
There is a problem that one of the many protect circuits are detecting
on power on. Get it fixed now before you have more parts fail and will
cost more to repair. There are too many different protect circuits and
circuits being monitored to know the cause of the failure without some
serious troubleshooting time in the set when it is acting up.

Whats the model number ...and ...what is the LED blink sequence????


Scott
EMF Services
Loudon NH

You are best to get it serviced before more damage occurs. Some components
in the protection circuits, or in the scans and or power supply sections may
be failing. Using the set the way it is, will most likely raise the end cost
of servicing.

--

JANA
_____


"Jim & Ellen" wrote in message
...
I have a Toshiba cinema series hd ready set that will not cut on. If you try
to cut it on, all you get is the red power light starts flashing. If you
reboot the power the set comes on with no problem. The picture and sound are
great, but the tv has to be rebooted to start it. The problem was random at
first but now it's everyday.

Jim