I bought a busted Moonlight NV-100 night vision scope.
It doesn't work. Previous owner started taking it apart
without success. I'm stymied too.
The back end is loose, but the front is stuck under the lens
assembly. The obvous thing would be for the lens to
screw off, but it won't with the torque I'm willing to put on it.
What's the secret to getting the cover off?
I'm expeting to find little more than a HV power supply
that I can probably fix.
Suggestions? Schematics?
Thanks, mike
--
Return address is VALID but some sites block emails
with links. Delete this sig when replying.
..
Wanted, PCMCIA SCSI Card for HP m820 CDRW.
FS 500MHz Tek DSOscilloscope TDS540 Make Offer
Wanted 12" LCD for Compaq Armada 7770MT.
Bunch of stuff For Sale and Wanted at the link below.
MAKE THE OBVIOUS CHANGES TO THE LINK
htremovethistp://www.geocities.com/SiliconValley/Monitor/4710/

You sure it isn't one of those where the front cover is glued in place
on the casing- so you pull the entire assembly out of the back?

Just a thought.

-A

wrote:
You sure it isn't one of those where the front cover is glued in place
on the casing- so you pull the entire assembly out of the back?

Just a thought.

-A


Thanks, but it unscrews. You just have to grit your teeth while a
really strong friend twists it off.

Now, I just gotta figger out the power supply. All the parts are good,
except I can't really test (or fix) the transformer, it just don't
oscillate.
mike

--
Return address is VALID but some sites block emails
with links. Delete this sig when replying.
..
Wanted, PCMCIA SCSI Card for HP m820 CDRW.
FS 500MHz Tek DSOscilloscope TDS540 Make Offer
Wanted 12" LCD for Compaq Armada 7770MT.
Bunch of stuff For Sale and Wanted at the link below.
MAKE THE OBVIOUS CHANGES TO THE LINK
htremovethistp://www.geocities.com/SiliconValley/Monitor/4710/