Hello,

Let me start off by saying that the only experience I have with
soldering electronics is from my grade 8 electronics class so I'm
wondering if I should even bother trying to repair my CRT Monitor...?

My problem is almost exactly the same as this a thread I found searching
google on this forum

http://groups.google.ca/group/sci.el...e_frm/thread/d
da718027c3168aa/703ec0ac89d30c81?q=CRT+horizontal+shrinking&rnum=1 2
&hl=en#703ec0ac89d30c81

My 17 inch AOC monitor has a hourglass shaped picture upon turning it on
if left on long enough the picture eventually returns to normal...the
pincushion controls have no effect on the monitor when its in this
hourglass shrunken state

Could a electronics newbie tackle fixing something like this???

This is not from a solder connection. It would be more than likely a
component or a number of them that have become thermo sensitive with
age and use.

With proper troubleshooting technics, training, and the proper tools,
it is possible to locate the defective parts and change them.

If you want your monitor serviced, give it out to a professional
monitor service place, to have it done safely and properly.

When working on monitors, there are some very serious safety issues
involved. It is not worth the personal risk to work in these without
having the proper training and knowledge of what you are doing.

TV monitors and microwave ovens are the two most dangerous appliances
manufactured for consumer use.

Jerry G.
======

If I wanted to learn about repairing these type of devices which field
in school should i be studying???

"Jerry G." wrote in news:1116705853.071563.126370
@g43g2000cwa.googlegroups.com:

This is not from a solder connection. It would be more than likely a
component or a number of them that have become thermo sensitive with
age and use.

With proper troubleshooting technics, training, and the proper tools,
it is possible to locate the defective parts and change them.

If you want your monitor serviced, give it out to a professional
monitor service place, to have it done safely and properly.

When working on monitors, there are some very serious safety issues
involved. It is not worth the personal risk to work in these without
having the proper training and knowledge of what you are doing.

TV monitors and microwave ovens are the two most dangerous appliances
manufactured for consumer use.

Jerry G.
======

Have a read here
http://repairfaq.ece.drexel.edu/sam/monfaq.htm

Wayne

On Sat, 21 May 2005 20:43:42 GMT, Obiwan Rules the house
wrote:

If I wanted to learn about repairing these type of devices which field
in school should i be studying???

"Jerry G." wrote in news:1116705853.071563.126370
:

This is not from a solder connection. It would be more than likely a
component or a number of them that have become thermo sensitive with
age and use.

With proper troubleshooting technics, training, and the proper tools,
it is possible to locate the defective parts and change them.

If you want your monitor serviced, give it out to a professional
monitor service place, to have it done safely and properly.

When working on monitors, there are some very serious safety issues
involved. It is not worth the personal risk to work in these without
having the proper training and knowledge of what you are doing.

TV monitors and microwave ovens are the two most dangerous appliances
manufactured for consumer use.

Jerry G.
======

The best approach is to go to a university or college and enrol in to
an electro technology coarse. Usually this is a 3 to 4 year training
program starting in basic electronics, physics, and math. After this,
you can then go on to a specialization. With an electro technology
degree, you can also go on to electrical engineering. From there, you
will find many possibilities.

A sort of shortcut way, is to take a one or two year training coarse in
TV and appliance servicing through a trade school. These devices are
very sophisticated, and without a solid basic electronics background,
you would really only be able to grasp things at a very basic level. In
this case, your service capability would be more procedural, rather
than in a detailed analytic manner.

To study electronics, it takes a lot of time and devotion. There is a
lot of math, basic physics, some statistics, and some logistics
envolved as well. I would not think you would want to get an
electronics degree of some type, just to be able to service your own
home appliances!


Jerry G.
======