Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
convergence problem with Sony projector TV
I have a Sony KP-46V15 rear projection TV and have developed a yellow
halo on the right side of objects on the screen. I try to adjust the convergence with the remote but when I get to white crossed lines I still have yellow at both ends of the horizontal line. How can I adjust this?? Help and thanks |
#2
|
|||
|
|||
You cannot adjust this. The blue registration has a failure that needs
repaired, then the set will need readjusted for the new parts. |
#3
|
|||
|
|||
Is this an expensive fix? Could I replace the parts myself?
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sony Triniton pincushin problem | Electronics Repair | |||
Sony camcorder problem CCD-TR5, no video output | Electronics Repair | |||
Sony TV vertical interlace problem... | Electronics Repair | |||
Mitsubshi VS-5007 convergence problem | Electronics Repair | |||
Sony G410R Monitor problem (and bad Sony support) | Electronics Repair |