Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Hafler DH101 noise
Recently only one channel my preamp started having random crackle and pop noises. The music on this channel also sounds distorted when the crackle and pop noises are present. The noise is only intermittent.
The noise is not affected by the signel source, dub and mono switches, the balance and volume knobs nor the tone switch/settings. The functional block diagram on page 21 of the Hafler manual shows only the high level gain stage and the dc feedback sections as unaffected by all of these controls. Can anyone suggest where to look / test for the source of these noises? The manual is available on line at http://www.hafler.com/techsupport/index.asp?ID=3 Thanks for any help. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Washing Machine noise | Home Repair | |||
help me figure out this noise | Home Repair | |||
Artisan saw noise | Woodworking | |||
Makita Cordless 18V Drill - Chuck Noise | UK diy | |||
How to Adjust the Tape Path Alignment on Newer VCRs | Electronics Repair |