Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
SPS10A-001 Wallmount Power Supply - How to modify ???
Anyone know how to modify this power supply for different voltages?
There's no potentiometer on the board. AC ADAPTER MODEL : SPS10A-001 (TSA-0285) INPUT : 100-120VAC 50/60Hz 1.0A MAX OUTPUT : 3.0 - 36VDC 3.0-0.41A 15W MAX PRESET : 5.0VDC 2.0A I.T.E POWER SUPPLY MADE IN THAILAND |
#2
|
|||
|
|||
On Wed, 27 Apr 2005 21:39:42 -0400, "The Analog Kid"
put finger to keyboard and composed: Anyone know how to modify this power supply for different voltages? There's no potentiometer on the board. AC ADAPTER MODEL : SPS10A-001 (TSA-0285) INPUT : 100-120VAC 50/60Hz 1.0A MAX OUTPUT : 3.0 - 36VDC 3.0-0.41A 15W MAX PRESET : 5.0VDC 2.0A I.T.E POWER SUPPLY MADE IN THAILAND You could probably do it by changing one or two feedback resistors. Assuming it is a switchmode device, there should be a PWM regulator/controller IC. This IC will incorporate an error amp. Usually, one pin will be connected to an internal reference voltage, while another will connect to the output via a resistive potential divider. Tell us the part number of this IC and we can then advise you how to proceed. - Franc Zabkar -- Please remove one 's' from my address when replying by email. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Converting old PC power supply to hobbyist PSU | Electronics | |||
Need help re power supply for new Digital (DLP) tv | Home Ownership | |||
Sony VCR Power Supply | Electronics Repair | |||
Sony KV-2782R and 2785R, power supply problems. | Electronics Repair | |||
Epson ELP 7200 Projector Power Supply Help | Electronics Repair |