Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Hi,
Thanks to everyone for your responses. The only part I had to replace was the TDA8350Q. I tested the caps, some of you suggested may also need replacing, but they were fine. The other thing I did was solder several joints that had fine cracks due to thermal cycling. Brad Before you type your password, credit card number, etc., be sure there is no active key logger (spyware) in your PC. On Tue, 12 Apr 2005 14:37:12 GMT, in sci.electronics.repair you wrote: Hi, I have a Samsung TV TXE2545 mfg 4/97 in my shop with half a picture (bottom half) which is linear (normal). At the center (top of half of picture) is a bright horizontal line. Above, the screen is black. I scoped the input signal (pin 1) to IC301 TDA8350Q and it looks normal. Pins 4 and 8 have a little above normal voltage. Could the cause of this problem be IC301? Thanks in advance, Brad Before you type your password, credit card number, etc., be sure there is no active key logger (spyware) in your PC. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Samsung Microwave & GE Microwave oven | Electronics Repair | |||
Hitachi C1714TE TV - lower half of picture disappears | Electronics Repair | |||
Old JVC VCRs - half of picture missing | Electronics Repair | |||
Samsung txe2545 | Electronics Repair | |||
Compaq P110 21" monitor "jumping" at bottom half of the screen | Electronics Repair |