Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Brian
 
Posts: n/a
Default JVC Car CD Player Repair info needed, wanted, ....

Hi,
I have a JVC KD-LH7R Car CD/MP3 player, works Ok apart from the Volume
control. The control is one of the modern type, not a potentiometer, but
I assume it sends some kinds of pulses to the electronics when turned.
Its got a detachable faceplate. Anyway sometimes it works and the volume
can be adjusted, but you need to turn it a lot, sometimes it gets
quieter instead of louder, etc.
I took the face plate to pieces and the right hand side of the
electronics is loose, but I cannot get the side where the volume control
is to come away from the front covering, it really is fixed. No screws
or other things to be seen. I assume if I can ge the electronics out
then I can see the moving parts and then maybe blow air through them to
clean it. So, anyone know how to do that? The rear cover came off OK
with fours screws, they go through the electronics and into the cover
(that part that you see looking at the player from the front). I tried
forcing it a little but, its not just stiff, it is fixed somehow.

Cheers Brian
  #2   Report Post  
frontline@nospam
 
Posts: n/a
Default

I can only guess from your description that the knob is stopping it
from comming apart
some are tight and hard to remove.
Air will do little or nothing to clean it, chemical cleaner may work
for a while.
Replacing it usually will fix the problem.
Jeff

  #3   Report Post  
frontline@nospam
 
Posts: n/a
Default

I can only guess from your description that the knob is stopping it
from comming apart
some are tight and hard to remove.
Air will do little or nothing to clean it, chemical cleaner may work
for a while.
Replacing it usually will fix the problem.
Jeff

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
IBM G50 Monitor Repair Info Needed - HELP ! ! Getafix74 Electronics Repair 6 January 29th 05 11:55 PM
Tower Building Help / Info needed Jess Metalworking 19 January 17th 05 04:57 AM
one-off gear cutting info needed. [email protected] Metalworking 2 December 16th 04 06:41 PM
Circuit City ESA Brandname a problem if repair ever needed? jeff Electronics Repair 25 December 16th 04 05:00 AM
Pioneer PD-5700 CD Player schematics wanted Gaspar Electronics Repair 1 January 10th 04 07:28 PM


All times are GMT +1. The time now is 06:18 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"