Hello all,

I've got a Luxman K-5A cassette deck in for service that could use a
set of belts and idlers. The last Luxman parts distributors I dealt
with (Pacific Coast Parts and Canton) are not able to help.

Does anyone know of a source, or at least have dimensions of the
belts? I can probably resurface the idlers.

Thanks,
Tim Schwartz
Bristol Electronics

"Tim Schwartz" wrote in message
...
Hello all,

I've got a Luxman K-5A cassette deck in for service that could use a
set of belts and idlers. The last Luxman parts distributors I dealt
with (Pacific Coast Parts and Canton) are not able to help.

Does anyone know of a source, or at least have dimensions of the
belts? I can probably resurface the idlers.

Thanks,
Tim Schwartz
Bristol Electronics

Sounds like you're just going to have to size them up and replace them with
generics from MCM or the like. Might take some experimentation. Fortunately
most generic belts don't cost much over .50 each from MCM or East Coast
Transistor parts, etc. Should be able to guess a range, like 8.0 x .20 to
10.5 or so, then order several, and try one 'til you get a fit you like.
Kind of a pain though...

Mark Z.