| Home |
| Search |
| Today's Posts |
 |
|
Menu
| Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings. |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
| Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.binaries.schematics.electronic
|
|||
|
|||
Digital step generator
I found this circuit online.
http://members.ozemail.com.au/~bisagoma/step_sine.jpg I found this circuit online. http://members.ozemail.com.au/~bisagoma/step_sine.jpg And re-drew it as follows. http://members.ozemail.com.au/~bisagoma/step_gen.jpg But ... it does not appear to work as described. The input is a 512 Hz clock pulse. The output on pin 3 of the CD4051 is a slightly noisey plain squarewave divided by 32 (16Hz). IOW no steps. Can anyone point out a design fault in this circuit or other reason why it might not work? Lewis |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| All I did was follow the Directions Step by Step | Home Repair | |||
| All I did was follow the Directions Step by Step | Home Repair | |||
| When is a digital/analogue phone not a digital/anaalogue phone? | UK diy | |||
| Step-by-step how to correct grading near foundation? | Home Ownership | |||
| Step By Step Instructions For A Free Photo IPOD | Electronics | |||
Threaded Mode
