| Home |
| Search |
| Today's Posts |
 |
|
Menu
| Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
| Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.binaries.schematics.electronic
|
|||
|
|||
Dukane 6V6 Push-Pull amplifier
Here's a schematic of the tube amp I have on ebay.
Thanks for the bandwidth!!! |
|
#2
Posted to alt.binaries.schematics.electronic
|
|||
|
|||
|
Dukane 6V6 Push-Pull amplifier
Interesting how the cathode and Plate of V4 are connected. Is that what they
called Cascode? Grid of the upper half of V4 is at a positive bias to set the operating point. "tube.guy" wrote in message news:LHXLh.40547$yj7.22072@trnddc02... Here's a schematic of the tube amp I have on ebay. Thanks for the bandwidth!!! |
|
#3
Posted to alt.binaries.schematics.electronic
|
|||
|
|||
|
Dukane 6V6 Push-Pull amplifier
Yep- bottom tube cathode resistor sets top plate voltage, middle tube grid
sets bottom tube plate voltage. Bottom tube operates in transconductance (i.e., into the ~300 ohms cathode impedance of the top tube), giving good HF performance and gain (the thing behaves roughly like a tetrode). Tim -- Deep Fryer: A very philosophical monk. Website @ http://webpages.charter.net/dawill/tmoranwms "Oppie" wrote in message .. . Interesting how the cathode and Plate of V4 are connected. Is that what they called Cascode? Grid of the upper half of V4 is at a positive bias to set the operating point. "tube.guy" wrote in message news:LHXLh.40547$yj7.22072@trnddc02... Here's a schematic of the tube amp I have on ebay. Thanks for the bandwidth!!! |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Can a 10 HP Sears garden tractor PULL or PUSH anything? | Home Repair | |||
| I want to ask you the most important question of your life: cut on the pull stroke, or the push? | Woodworking | |||
| More fun with push sticks!! | Woodworking | |||
| Where to get small push-push panel latches? | Metalworking | |||
| Cobramatic push-pull guns? | Metalworking | |||
Linear Mode
