"charlie b" wrote in message
...
Ralph E Lindberg wrote:
Still
need a thin parting tool - for less than $25.

=======================

Find a place that sells wood cutting blades (approx 5-6 inches long) for
reciprocating saws (Sawzall, etc.), grind the teeth off. Cut/grind the end
at about a 25 degree angle, tape the other end (or sandwich it between two
3/4 X 1 1/2 in pieces of hard wood), and you have a parting tool similar to
the Cris Stott tool. Use it point down for parting.

Ken Moon
Webberville, TX.