View Single Post
  #8   Report Post  
Leonard Caillouet
 
Posts: n/a
Default

My point was a general one...if someone wants specific help with anything,
it is a good idea to post the model and problem in the subject line. It
could have been the immediately preceding post and would not change the
point. I had just cleaned out my local newsgroups and am not going to
bother to go dig up the post only to find out that I don't have the manual
anyway. The point is, if people want help, they need to make it likely that
others will see their needs.

Leonard

wrote in message
ups.com...
Leonard:
Here is the #1 posting by "stok".... you will find the Make and Model
in his very first sentence.
..... your reply post was #4.
electyricitym


"From: -
I am looking at a Panasonic DVD player #SA-HT75. Insert disk, dispays
reading, then after a few seconds displays no disk. Tried different
disks with same results. Tried cleaning the laser, but no change. I
checked the voltage on the motor that drives the disk and no problem
here. I did this because I noticed when the disk is inserted, it
doesn't turn. The laser module slides back and forth like it's supposed

to. Shouldn't the disk spin when inserted to be read? is the best
course of action, replace this as a module if available, or the motor
if this is the fault. Thanks all."
.
.
.