On 4 Oct 2005 09:13:52 -0700, wrote:

(snip)

I have read other scenarios about reversing with other machines, but
this is designed to run 220V single phase. Any help would be
appreciated.

DC

I'd suggest contriving a foot-actuated brake that can kill power and
stop the spindle instantly. My lathe came with such a brake, and it
is very handy when cutting threads close to a shoulder. At low
speeds I can always stop within considerably less than 1/4 revolution.
I usually make a relief groove about .050 wide next to the shoulder
for the bit to stop in.