On Sat, 17 Sep 2005 07:04:11 GMT, with neither quill nor qualm, Gunner
Asch quickly quoth:

On Fri, 16 Sep 2005 12:15:32 -0700, Larry Jaques
wrote:
I picked up some 1/2" square tubing a short while back and
need to cut and arc-weld some together. I have a little HF
132amp ac/dc welder and some 3/32" 7018 and 1/8" 6011 rod.
What settings should I use to join the 45°-cut tubing at 90°?

the 3/32 at about 35 amps. AC would be cool, as you wont have as much
arc blow in the inside corner.

Danke.