"kecp36" wrote in message
oups.com...
I have 3 French appliances (Miele) which I brought to New York: 1
dishwasher, 1 dryer & 1 washing machine.

Has anybody been successful at hooking up this type of applicance here
in the US?
They take 220V, 50Hz and 3000W in average each( I have 4000 W
transformers which seem to do the trick even if they won't convert the
50Hz into 60Hz (any risk here?).
Would it be better to install a 240V line directly to the machines
instead of using the transformers?

Also, the plumbing side is somewhat challenging (the washing machine
and dishwasher both take 3/4" instead of the standard 3/8" here) which
I overcame in piling up some plumbing adaptors. A little leaking
though.

Please HELP if you survived such an experience.

Thanks

No offence intended
For what it cost ya to ship them, it probably would have ended up being
cheaper to sell them there.

Other poster is right on.... check with the manufacture. Motors and heating
elements do not care about the frequency. Clocks, and timers do.

I am at a loss on your transformer explanation. If you have 240v there
already why are you using a transformer? Transformers generally do not
convert frequency.

Replacing the valves should solve the problem.

Just wait until you need service.

I worked on a pastry "sheeting" machine, used for croissants. The special
French motor toasted. Nothing, I mean NOTHING was available in North America
would replace the motor. The owner of the shop called France and ordered a
new motor, not much bigger around than a loaf of bread. Cost for the motor
was $3500.00, that is US dollars not Francs. Shipping cause they were not
making pastry was another $900.00. After I got it working again I
suggested that the owner lay in a stock of parts that might be needed.

Good luck, If I lived in France I would have French equipment. At least your
in the Apple if anywhere will have parts for your stuff they will. Now at
what cost.