"Seventh Prince" wrote in message
oups.com...
Hi,

Any advise for How to solder live 2A glass fuse to Power supply board
in exchange for the PCB solder 2A fuse. And what type of power wire
should be used to connect the glass fuse to the PSU board? I need to
solder the wire to the glass fuse in order for further soldering to the
PSU board.

Have tried with thin insulated signal wire and ceramic fuse wire but
PSU will blow out fuse each time. AC voltage is 240V.

Thanks.


Most good radio/TV shops have this fuse (pigtail version) in stock for TV
chassis. An ordinary 5x20 mm or 3AG holder can be substitutes IF the
VOLTAGE ratings of the holder are greater than the circuit's voltage.

gb