You've been very patient with me. It's just that The Base is ~30" with the
router bit dead center on 15.. The table center point should be approx ~22"
with an estimate of stops 4" in.

I did as you suggested I used 2 30" pieces of wood. Since I am guesstimating
that the stops are 4" from either end I come out with 82 inches of travel,
and Cutting range of 42.
15 (bit center)- 4 (stop) = 11 to the left side on the tables right. as I
move the table to the left I reach the bit with the left side at 11" of
travel as I continue for 30" of the sliders length the right side end should
travel another 11" past the router bit to the right stop.

Maximum Fence Working
Surface........................................... .........................3
" x 36"

Basically the argument is sound either way since neither of us know the
travel length of the table or even the positioning of the miter.....



Your feedback is both highly regarded and appreciated, I'm just a thick Mic.



joe



MODEL G0528 ROUTER TABLE


specs
Design
Type.............................................. ..........................
............................... Floor Model

Overall Dimensions:

Main Table
.................................................. ...........................
.....31" W x 10" D x 13.4" T

Sliding Table
.................................................. ...........................
...............31" W x 12" D

Total Table Surface
.................................................. ...........................
.....31" W x 22" D

Overall Height
.................................................. ...........................
...........................42" H

Height From Table To Floor
.................................................. ...........................
.....34" H

Overall Width
.................................................. ...........................
.............................40"W

Overall Length
.................................................. ...........................
...........................30" D

Shipping Weight
.................................................. ...........................
.....................132 lbs.

Net Machine
Weight............................................ ..........................
.....................125 lbs.

Box Size
.................................................. ...........................
.........351.2" W x 26" D x 8" H

Footprint
.................................................. ...........................
.......................40" W x 30" D

Capacities:

Suitable Routers For
Mounting.......................................... ........................3.
4 HP - 5 HP

Table Counterbore
.................................................. ...........................
.......................31.2"

Table Insert Diameters
.................................................. ...........................
.....11.8" & 25.16"

Fence Size
.................................................. ...........................
.......3" x 12" (Each Piece)

Maximum Fence Working
Surface........................................... .........................3
" x 36"

Dust
Port.............................................. ..........................
...........................................21.2"

Construction:

Main Table
.................................................. .......................Prec
ision-Ground Cast Iron

Sliding Table
.................................................. ...........................
.......................Aluminum

Fence
Assembly.......................................... ..........................
.............Aluminum & Steel

Stand
.................................................. ...........................
...............Powder-Coated Steel

Miter
Body.............................................. ..........................
...............................Aluminum

Features:

.................................................. ...........................
.....................Workpiece Hold-Downs

.................................................. ...........................
.......................Clamping Miter Gauge

.................................................. ...........................
.............Toggle Switch W/Safety Key

...................................Dual Power Outlets For Convenient
Router/Accessory Plug-Ins

.................................................. .....................45°
Table Tilt For Easy Router Mounting

.................................................. ...........................
.......................................Sliding Table




"BillyBob" wrote in message
k.net...

"*HMFIC@1369*" My wrote in message
news:fJHOe.6418$Fq2.145@trndny03...
The way I was looking at was that both tables are 30", if the slider
draws
back 6" before the bit that'll give me 36" of travel. Correct me if I'm
wrong.

Joe you're looking at it wrong. I tried to think about all kinds of ways
to
convince you with words but I cannot describe it. Get some boards or
pieces
of paper to create a model of the router table, sliding table and the
board
attached to it. Move it around and take some measurements. I think you'll
convince yourself that there is no way to get 36" of travel.

Bob