Well if the correct fuse value blows then its obvious that the PS has
problems.
If you need that type why not just buy fuses with pigtails...


"Seventh Prince" wrote in message
oups.com...
Hi,

Any advise for How to solder live 2A glass fuse to Power supply board
in exchange for the pcb solder 2A fuse. And what type of power wire
should be used to connect the glass fuse to the PSU board? I need to
solder the wire to the glass fuse in order for further soldering to the
PSU board.

Have tried with thin insulated signal wire and ceramic fuse wire but
PSU will blow out fuse each time. AC voltage is 240V.

Thanks.