Franc Zabkar wrote:
I rechecked the tube and Pins are correct as labeled. Pin 7 has 270+ volts
on it.
That looks like G1.

I have never in my life seen such a high G1 voltage. It is most
certainly G2. In that case the voltage is a bit low, which is either
caused by the load of the voltmeter, or somehow related to your problem.

There are 2 pins in the 'key' that have wires running back to the
flyback.
Probably Focus and G2/Screen.

Wrong again, probably. These are the 2 focus connections.

---
Met vriendelijke groet,

Maarten Bakker.