On 19 Aug 2005 09:58:05 -0700, wrote:

Done that, no difference, Gave the valve cover screws a slight tap with
the hammer and then used a big screw driver and that did the trickl.

I bet I probably needed the non return valves too!!!!

Any ideas anybody, I'm at a loss now, the only option I see is
upgrading the pump.

Cheers

Richard


What is the pump sizing, head from the roof tank, and the sizing and
length of the pipes before and after the pump, Richard?


--

..andy

To email, substitute .nospam with .gl