That sounds very similar to mine, the front, main piece of the table looks
as though it bolts to the metal stand, there are adjustments to make it
level, and there are two clamps at the back that press the other pieces
against it.

Others use particle board up to 1 1/2" thick and I've seen particle board
with a laminate.

It sounds as though the two pieces at the back can be reversed to move the
fence to its furthest back position for the largest cuts and to a position
where it sits in front of the blade. If that's the case I can probably
figure out what dimensions work. However I'd appreciate if you could send
me the dimensions from your saw.

Thank you,

Peter
"woodworker88" wrote in message
oups.com...
Our shop has one from who knows where and it has a particleboard table
and a plywood fence. I don't know about yours, but mine has weird type
of wing nut that allows you to use multiple pieces (mine has 3) and
pull them tight up against a metal bracket. I can get the dimensions
for you if you want.